Stump Removal | Stump Grinding | Multiple Stumps
We've seen graffiti on the sides of buildings and fences, but what about trees with graffiti on them? Removing graffiti paint on non-living surfaces necessitates some chemicals and real elbow grease. But it can be done. When graffiti is on your trees, getting the paint off might be a tad difficult. Below is some advice on how to remove spray paint from your trees without harming the tree or the earth.
Methods on How to Remove Spray Paint
When graffiti taggers harm your trees, the result is not only hideous, but it might express nasty messages. Moreover, some paints cause poisonous damage to trees and block the lenticels necessary for tree respiration. Cleaning graffiti off a tree safely necessitates some scrubbing and vigilant monitoring of the tree's health.
There are several graffiti removers on the market, but some of them present breathing and cancerous problems for humans, as well as chemical and toxic issues for the tree. Eliminating graffiti paint on trees commands a more skillful touch than spray washing it off. You have to be mindful of the bark and outer tissue of the tree.
Standard graffiti removers have corroding ingredients which not only will burn the skin and lungs of the user but could also be harmful to the tree. One that is considered safe enough on many trees is Graffiti Gone. It asserts getting rid of the marker, pen, spray paint, and other surface staining items without injury to the tree or you.
Use caution on your tree with cleaning methods like power washing or scrubbing. Scrub little trees by hand, and a power washer on a low setting will work in removing graffiti paint on trees with a vast trunk.
Mechanically Getting Graffiti off a Tree
It might take some training to use a power washing tool to eliminate paint on trees. Step far away from the tree to be sure that every spray isn't harming the plant. The basic rule is to turn the washer on low to medium and be at least three feet away from the tree's bottom. If needed, slowly move in towards the tree, always checking for any bark damage. Only use a pressure washing tool on trees with a thick bark like oak, locust, cottonwood, or chestnut trees.
Other than scrubbing and power washing, another method to use is sanding. Work with light sandpaper, like a 400 grit, and hand sand the painted spots. Don't ever use a power sander. You will get rid of unpainted and necessary bark or wood. If you decide to try the sanding method, move the sandpaper in a polishing motion on the graffiti paint. Do this technique until it fades out or is completely gone.
Removing Graffiti Paint on Trees the Eco-Green Way
Getting graffiti off a tree without damaging the earth is conceivable. Apply a citrus-based degreaser or graffiti remover, which is commonly available at supermarkets and hardware stores. The active ingredients, like orange oil, are all-natural.
If you need more tips on how to get rid of graffiti off your tree, give us a call at Buffalo Stump Removal.
If an alluring scent is a goal, trees that smell good that meet the criteria aren't tall shade trees reaching the clouds, but are probably little flowering types. Truthfully, a sweet-smelling flower doesn't do you any good if it's way up in the sky where you can't enjoy it.
Small tree varieties do better than their taller cousins whenever it comes to carrying fragrant scents around your outdoor space. You can also guide some vines and shrubs to grow as little trees by eliminating their lower limbs. This technique is known as standards.
Trees that Smell Good: Use Caution
One individual's perfume can be another's stinky smell. Be mindful that not everyone, including your loved ones, will enjoy a flowering tree's aroma the same way you do.
Numerous people respond poorly to the scent of flowering trees, and some people are allergic to it. It's an excellent idea to talk with family and neighbors before picking a flowering tree. Strong-smelling types like lilacs can be problematic for some individuals.
Below are some excellent choices if you desire a tree to bring fragrance to your outdoor space. The assortment varies so that you can pick your choice on any characteristic that is crucial to you, such as size, color, or maintenance.
An apple tree produces not only sweet-scented fragrant flowers but also edible fruit too. The types grown for eatable apples are essentially cultivars from Malus Domestica. One of the more well-known multi-purpose variety to grow is the Honeycrisp, which rises to over 15 feet tall. The flowers usually bloom in the springtime, becoming full-bodied fruit that ripens from early to the middle of autumn.
Crabapples grow in a host of sizes and have a broader range of flower color alternatives. Also, there are fruitless cultivars like the white-flowered spring Snow. This choice is perfect for homeowners who aren't into cleaning up dropping fruit in their yard.
Crabapples make a stunning collection of blooms for around nine days in April. The fruit goes into jellies, jams, and pies. Though, these trees are practically grown for their flowers, which have a distinctly sweet scent.
Even though they're technically shrubs, lilacs can grow so big (over 15 feet) that they could function as little trees in numerous landscapes. If the height is a concern, pick cultivars from the common lilac species, not the compact types.
The Japanese tree lilac grows with a more standard tree-like tradition to a height of over 20 feet. Its scent is striking but significantly less potent than common lilac. Not to mention, lilacs possess an aesthetic appeal that few other flowers do.
Lilacs typically bloom in May, around the same time as crabapples. The scent is quite strong, and the bloom stage lasts for around 14 days. These shrubs can swiftly colonize unless you keep suckers pruned off at the ground.
For more suggestions on sweet-scented trees for your landscape, reach out to us at Buffalo Stump Removal.
If you genuinely desire to make a statement with your indoor greenhouse, growing a tree as a houseplant will achieve that. There are several different trees you can grow inside. Some of the best indoor trees listed in this article aren't trees. However, they will ultimately grow tall over time.
The Best Indoor Trees: Exceptional Household Plants
Here is an assortment of indoor trees that you can own. Some will be right for higher light, and some need lower light. There are suitable indoor tree types for several different conditions.
Fiddle Leaf Fig
Everywhere you look these days, you see a fiddle leaf fig. These plants develop in a host of light conditions going from brilliant indirect light to very sunny settings. What these figs won't deal with are limits in soil moisture. You'll need to find a pleasant, satisfying medium for these trees to flourish. Or else, these plants can get testy. Don't forget to wash the leaves once in a while. The foliage is susceptible to accumulating dust.
Bird of Paradise
Bird of paradise is not a tree. Instead, it's a massive plant with banana-shaped leaves. When you supply it with lots of sun, your reward is their distinctive flowers. They also like humidity, which can make it challenging to detect indoor conditions.
Rubber trees make incredible indoor trees. There are numerous varieties like ones with dark green leaves. They do excellently in a little amount of bright indirect light, but direct sunlight will encourage more significant growth. These plants might get leggy over time, but pruning fixes this issue.
Norfolk Island Pine
A fully-grown Norfolk Island pine is a fantastic sight. These trees are available around Christmas, like bright light. Put these plants in a southern or western window to stay healthy. Some direct sunshine is also helpful. These trees tend to be demanding when it comes to the moisture level of the soil. Keeping these plants too wet or too dry will end with falling branches. Once they fall off, they can't grow back.
This fabulous plant supposedly brings good fortune. These trees are native to swampy places in South America. You don't have to fret about over watering, though these trees do like good drainage indoors. Intense indirect light or even a bit of sun would help these wonderful foliage plants. The tree usually comes with a braided trunk.
The Schefflera, or umbrella plant, comes in an assortment of sizes and those with multicolored or typical green leaves. The littler tree types will flourish to around three feet, and the bigger ones can grow twice that size indoors. These trees enjoy bright indirect light or a small amount of direct sunshine. Don't forget to check frequently for pests since they can be susceptible to scale and other kinds.
Indoor trees not only add style and beauty to any room, but they also provide many health benefits. Call Buffalo Stump Removal for more suggestions on the best indoor trees.
Landscaping around trees with stones enhance the outdoor space using natural materials. Professionals state that virtually a significant amount of a residence's water goes to hydrate a landscape and grass. Also, using rocks as mulch sustains water. Placing little stones around trees acts as an organic mulch by shielding roots, keeping the moisture, and stopping weeds.
Landscaping Around Trees with Stones
Step 1 -
Choose the types of rocks for the landscape carefully; take into account texture, weight, and color. For instance, lava rocks possess the benefit of being porous and light, letting moisture and air get to the tree rooting system. Pick red to give color, vibrancy to the landscape, or onyx for a cool, smooth appearance.
Use stones as mulch, a few decorative rocks, and accent boulders to put in a rock garden feature. Creating a bit of difference enriches the look of the outdoor space.
If the area with the trees is bare, choose some vivid, multicolored rocks. To emphasize colorful plants, pick simple rocks in tan, gray, or black according to what goes excellent with the home and its exteriors.
Calculate the distance from the tree trunk outward to five feet and put a stone in the point. Repeat at five more places around the tree.
Measure the trunk diameter using a mark on one side of the tree to a spot on the other. Slice the landscape fabric to this size. Fold over the landscape fabric in half and slice half-way up the fold from the edge to the middle. Cut a ring out of the middle the size of the tree trunk.
Put the landscape fabric around the tree.
Construct a rock border to enclose the mulch. Dig a trench around two inches deep around the tree beside the marks to put the rocks. Build the canal with the same width as the regular width of the border rocks.
Put the rocks close to each other along the trench. Make the border out of matching stones or rotate colors, creating a pattern. For instance, create a design of five black lava rocks then one gray lava rock continuing around the tree to produce a circle of red and gray lava rock mulch.
Put landscape mulch rock in the circle surrounding the tree. If you own a wheelbarrow, push it to the rock border and raise the handles, dumping the mulch load. You can also pour the mulch from a bin or bag.
Spread out the mulch around the tree with a rake or shovel.
Advantages of Stones in Landscape
Natural stone is one of the most resourceful components available for a landscape remodel. Using ornamental rocks in your landscape near your trees deliver texture and contrast, offering a sturdy groundcover that necessitates little or no upkeep. It's important to remember that the rocks you pick will help set the mood for the rest of your garden.
If you need assistance choosing rocks for your landscape, give us a call at Buffalo Stump Removal.
Why paint tree trunks white? Painting tree trunks white has many objectives, protecting young trees from harm. White tree bark helps eliminate split and sunscald bark as well as pest damage.
Trees are incredibly resilient and adaptable, offering protection for us and numerous other species. Young trees necessitate time to become sturdy and stable, requiring a little assistance from you to live the first couple of years.
Reasons Why Paint Tree Trunks White
Painting tree trunks white is a conventional method of young tree security usually found at tree farms and orchards. There are many reasons, but key among them is to stop the breaking and splintering of the fresh new bark, let in fungus, bugs, and diseases.
Also, it is useful to show up insect infestations, stopping borers. There is some argument as to the efficiency of tree trunk painting. It directs hot sun rays from the young bark. However, the wrong product might create more harm than good.
White Tree Trunk Paint
The correct product to use to paint tree trunks is water-based latex paint. Dilute the paint at a proportion of a gallon of latex paint combined with four quarts of water. Research shows that a complete application works best against borers. Borers either overwinter in the soil to come out in the springtime or bury in the trunk bark.
Another effective mixture is one-third joint compound, latex paint, and water, latex paint and joint compound, helpful for sunscald defense. Do not use oil-based paint, which won't let the tree respirate. If pests like rabbits are snacking on your young trees, apply a rodent repellent to the painted tree trunk paint to stop them from eating.
While some professionals state only to use interior paint, others advise the opposite. The truth is: as long as you use latex paint, it will be okay,
Remember, though, that some stains include additives that can be hazardous to plants. Check the product ahead of time. Look for paints with an eco-green, all-natural base that will eliminate this concern.
If you don't like white paint, use any light color which delivers the same results. Stay away from dark hue paints. These products cause sunscald and absorb heat.
How to Paint Tree Bark
Once you have combined your paint mixture, it's best applied using a paintbrush. Studies show that spraying doesn't give ample protection and doesn't adhere well to the bark.
One single application is enough in all but the most severe conditions. Painting tree trunks white is a non-toxic and straightforward way to safeguard your plant from many various issues. The method inexpensive, easy, and is necessary to use just once every 12 months in severe weather zones.
This technique of painting tree trunks white is whitewashing. The white paint redirects the sun and making the bark cool.
Several types of tree trunks have white latex paint applied to stop the bark's killing by abrupt temperature changes in late autumn and winter. Adding a rabbit repellent to the paint aids in safeguarding the tree from cold rummaging into the bark.
Call us at Buffalo Stump Removal if you need help painting your tree bark white.
You may have seen that an odd branch has begun growing from the base of your tree. It might look much like the rest of the plant, but soon it becomes clear that this weird branch is nothing like the tree you planted. The leaves might look different, it might grow inferior fruit, or it might be a different type of tree all together. What is happening? You have tree suckers?
What is a Tree Sucker?
Basically, a tree sucker is an effort by the tree to produce more branches, if the tree is under stress. However, you have taken ideal care of your tree and it wasn’t under any stress. Moreover, that does not tell why your tree has swamped varieties. Odds are your tree is really two trees grafted together.
If the lower half of the tree is stressed out, it will attempt to reproduce itself. It accomplishes this by growing suckers from the lower stem or root. Tree suckers can grow on trees that aren’t grafted but are usually found on grafted ones.
Tree Sucker Control
It is better to try to stop a tree sucker instead of scheduling You may have seen that an odd branch has begun growing from the base of your tree. It might look much like the rest of the plant, but soon it becomes clear that this weird branch is nothing like the tree you planted. The leaves might look different, it might grow inferior fruit, or it might be a different type of tree all together. What is happening? You have tree suckers?
Below are some ways to aid with tree control:
Keep plants in good health. The rootstock on a tree will begin to grow plant suckers when extra stresses, such as disease, pests. drought, or over-watering threaten the tree.
Don’t over prune. Too much pruning can encourage the growth of tree suckers. To stop a tree sucker, try not to slice into growth that is over a few years old. Prune regularly. Even when over pruning produces plant suckers, normal healthy pruning can aid with tree sucker control.
Removing Tree Suckers
Tree sucker removal is simple to do. Tree sucker removal is performed in the same manner pruning is done. Using a clean, sharp pair of pruning shears, neatly slice the tree sucker close to the tree, leaving the collar to aid speed up the wound recovery.
Use this tree sucker removal technique as soon as you see any tree suckers appear so that you put no more stress on your tree. You can always enlist the help of a Buffalo Stump Removal professional to remove the tree suckers.
Hornets and yellow jackets are two of the most common types of wasps that make their nests in your yard. While these insects are frequently seen as pests due to their nasty stings, they’re vital for your yard as pollinators and predatory insects. However, when their nests are too close for comfort, these insects and their nests have to go. It’s necessary that you know how to get rid of wasps to hinder future issues that might come up.
The best way to deal with wasps is to reduce their numbers by dissuading them from your yard. Do not have any food lying around. Keep drinks covered when outdoors and always be sure that garbage cans are firmly sealed. Also, pick up any fallen fruits. The sweet juices entice wasps.
How to Get Rid of Wasps
If you want to know how to kill wasps, then you must know which type you are dealing with and their specific habits.
For example, yellow jackets usually build their nests in the ground. Sadly, you might not know they’re there until it’s too late. Hornets usually nest under the eaves of buildings or in trees.
Typically, wasps like out-of-the-way, silent spots. However, it doesn’t always work like that. This is when the only choice for getting rid of wasps is with insecticide sprays or other means.
How to Kill Wasps
Normally, spring is the perfect time for killing wasps. By late summer and fall, their nests weaken as they get more interested in hunting for sugary sweet or collecting pollen. If you’re dealing with the more aggressive wasp types or their nest is too big, you might want to call in a professional tree maintenance and stump removal company to handle the job.
Otherwise, you can get a can of wasp and hornet spray and following the instructions, spraying the insecticide into the nest entrance or soak the paper wasp nest in the evening when the wasps are less active. Besides standard wasp spray, some people use WD-40.
While not really eco-friendly, putting paint into the nest might also be successful in getting rid of these pests.
Evergreen trees are loved by many people. They are enduring since they retain their leaves all year long. The color doesn’t change on the leaves, making the tree appear green and vibrant regardless of the season. However, not all landscapes have enough room for an evergreen. Therefore, dwarf evergreen trees for landscaping is the perfect idea.
Here are a few options to see a dwarf evergreen is the one for you:
A dwarf evergreen grows about 12 feet tall, though, they do grow very slow, only 2 to 4 inches every year. These trees barely make pinecones and the green needles emit a pleasant aroma.
This tree is a well-liked choice for plantings all over the U.S. In fact, it is one of the most famous trees used in outdoor spaces. Most landscapes have two dwarf evergreen trees in the entryway to a home, bringing it a formal look.
One main reason these trees are so popular is because they don’t need a lot of care. Because they grow really slowly, they barely need pruning. Dwarf evergreens flourish in cool weather, but struggle in places with extreme humidity and heat.
Mugo pine trees come in several varieties, each with different characteristics and shapes. Some have a wide-spread shape whereas others are shaped like a pyramid. Most folks plant this tree as a groundcover or low hedge.
For best growth, these trees should be in complete sun to partial shade. They don’t grow well in places that have hot summers. The deep, rich green color of the needles looks fabulous all year long.
Dwarf Austrian Pine
Dwarf Austrian pine trees are very compact and look more like shrubs. They are round pines with dark green long needles. These trees are ideal if you want to fill a little area instead of a huge yard. These trees thrive well in complete sunshine.
Regardless if your yard is small or big, there is a dwarf evergreen tree that will fit. Bring that visual appeal and incredible aroma to your landscape by picking one of the trees in this article. Contact Buffalo Stump Removal if you have to remove a tree to plant or stump to plant a new one.
It’s not unusual for trees to get cut down. This isn’t a somber affair, but instead an inevitable one if the tree sustains injury or disease and can’t recover. One such situation happens when you find termites in trees. Here’s what you must know if you believe termites have infested your tree and your tree stumps.
Types of Termites
There are two main types of termites: drywood and subterranean. As you may suspect, since drywood termites necessitate less moisture to live, they are usually the ones you’ll discover in attics as well as tree stumps in your landscape. Since they live in littler colonies than the subterranean termites, they create less damage.
Subterranean termites are typically found in homes and that cost owners thousands in damages each year. They may have wings which is why people often think they are flies at first.
While subterranean termites are the pests to soothe and calm, drywood termites create chaos too. But while they may infest your stump, they won’t infest your property if your home is over 20 feet away.
Preventive Measures Through Stump Removal
If you believe you see termites in your tree stump, the best course of action is professional stump removal service. This is performed with a technique called stump grinding.
Stump grinding entails using a loud, large machine chipping away at the stump until it grinds it down into pieces of mulch. A professional business will have your yard looking pristine in no time.
Termites are not discreet. They enjoy eating your wood and make a commotion. Therefore, at some point, you will probably hear them, most likely even before you see them.
Termite infestation in tree stumps is completely normal and nothing to be upset about. Though, if you do see termites in your dead tree stump, then you should take action to guarantee the safety of your landscaping and property.
The best solution in this instance is stump grinding, one of many services offered by Buffalo Stump Removal. Knowing what to look for when it comes to termites is imperative. Quick detection could save you thousands in destruction.
While numerous shrubs going dormant for the winter, low soil moisture, extreme sunshine, fluctuating temps, and windy, dry conditions might still take a toll. As a tree owner, it is important to know about protecting shrubs in winter, assisting them in weathering the cold.
Setting the Stage
The first step in safeguarding trees from winter damage is to accurately irrigate prior to the first hard freeze. While it is a great idea to hold back on water during fall to let plants harden-off for winter, it is vital for shrubs to go into the winter months with sufficient soil moisture.
After some light frosts in the autumn, irrigate shrubs deep down and put on a layer of mulch to control soil temperature and moisture.
Irrigate in the Cold
Even though much of your landscape might look dormant, remember several plants are still absorbing water. Watch the weather and be aware of the precipitation every month. Needled evergreen and broadleaf shrubs necessitate occasional irrigation during the winter, since they consistently lose water via transpiration, particularly during windy, dry periods when the sun is extreme.
When trees lose water quicker than the roots can replace it, the shrub gets dehydrated. In extreme cases, entire limbs can shrivel up and die. Standard irrigation guarantees moisture is available during crucial times, particularly when the dirt is cold, and water is not available.
Examine your shrubs for signs of dehydration during the season.
Broadleaf evergreens like rhododendron and camellia will show orange or yellow discoloration of foliage. Needled evergreens will change to brown or rust. Call Buffalo Stump Removal if your shrub is dead and needs to be removed.
Damage is usually worst on the side of the shrub facing the sun or wind. When planting new shrubs, put sensitive types in areas sheltered from direct winter sun and prevailing winds. This includes the northeast, east, and north sides of windbreaks, buildings, or structures.
For current shrubs in exposed locations, build a barrier to safeguard shrubs during the worst times. Begin by stretching burlap or canvas between posts along the west and south sides of the plant. Attach the material firmly and spread from ground level to the top of the shrub.
Buffalo Stump Removal wants to provide you with information about stump removal and stump grinding services. We also want to provide fun tips, tricks, and information to you to assist you in making your home or office as awesome as you want it to be!